Syma X1 Quadcopter – Binding Instructions & Switching Between Mode 1 & 2

 

Syma X1 4 Ch Remote Control Quadcopter with 3 Axis Gyros

 

 

Binding Instructions

Insert battery into the quad. Set it right side up on a level surface, LED will flash rapidly, during this time turn on the transmitter and wait until the LED becomes solid.
Binding is complete.

You only need to bind one time. After you bind follow this procedure.

Make sure the throttle is all the way down.

Turn the transmitter on first.

Insert the battery into the quad. The LED on the quad will flash rapidly then it will turn solid.
You are ready to fly.

 

 

How to switch the Tx between Mode “1? and “2?

Default is Mode 1.

To switch between Mode 1 and Mode 2 push the right trim button below the right stick (‘A’) to the right and turn on the Tx.

Keep repeating this to toggle between Mode 1 and Mode 2.

fail-safe = throttle kill

Tx range is about 100 feet.

Mode 1 = Throttle and rudder on the left stick.

 

 

 

 

“My text, pictures and videos are Copyright 2009 – 2017 Tom Zadar”