Nine Eagles Solo Pro 328A Helicopter – Standard & Beginner Transmitter Settings
RC Pro Setup Guide by: Tom Zadar
Setup for the Nine Eagles Solo Pro 328A – Nine Eagles J6Pro
Type – Helicopter
SWASH – 90*
STMOD – MODE2 if you want the throttle on the left stick
REVERS – ELEV = NOR, ALIE = REV, THRO = NOR, RUDD = NOR, the rest are Normal.
Travel Adjustment: All 100%
For quicker control response increase the ALIE and ELEV Travel Adjustment. *If you set the values too high the servos might bind.
Beginners should use the default values of 100%
Adjust RUDD Travel Adjustment to control the tail response and the speed of pirouettes.
Gyro Gain:
Hi Rate: 75%
Low Rate: 25%
Throttle Curve
0% 30% 60% 85% 100%
DR&EXP
Set D/R and EXPO to your personal preference.
Standard Settings
ELEV D/R = 70% EXP +30%
AILE D/R = 70% EXP +30%
RUDD D/R = 100% EXP LIN
Beginner Settings
ELEV D/R = 50% EXP +30%
AILE D/R = 50% EXP +30%
RUDD D/R = 100% EXP LIN
Ultra Beginner Settings
These settings are for hovering and slow flight only. These settings have very low servo travel which will make the controls less responsive to stick input if you need to tame down the controls even more.
Don’t try to flip or 3D with these settings.
ELEV D/R = 30% EXP -10%
AILE D/R = 30% EXP -10%
RUDD D/R = 100% EXP +20%
Here is a list I made of common Dual Rate and Expo settings for Standard/Beginner/3D settings for Quads and Helicopters.
If you don’t like to use Expo you can set it to LIN.
LIN = Linear
Some radios use the term Line instead of LIN.
Spektrum – LIN
Walkera Devo – Line
Walkera 2801 Pro – LIN
Standard Settings
ELEV D/R = 70% to 100% > 70%, 80%, 85% are commonly used
EXP = +10% to +40% > +30% is commonly used
AILE D/R = 70% to 100% > 70%, 80%, 85% are commonly used
EXP = +10% to +40% > +30% is commonly used
RUDD D/R = 100% > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use 100% to 150%
EXP = LIN > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use -10% to -70%
Beginner Settings
ELEV D/R = +40% to +60% > 50% is commonly used
EXP = +30 to +40% > +30% is commonly used
AILE D/R = +40% to +60% > 50% is commonly used
EXP = +30 to +40% > +30% is commonly used
RUDD D/R = 75% to 100% > 100% is commonly used
EXP = LIN or +1% to +20% > LIN is commonly used
Ultra Beginner Settings
These settings are for hovering and slow flight only.
ELEV D/R = +30%
EXP = -10%
AILE D/R = +30%
EXP = -10%
RUDD D/R = 75% to 100% > 100% is commonly used
EXP = LIN or +1% to +25% > LIN is commonly used
A good combination would be to use the Beginner Settings on Switch Position “0”
and use the Ultra Beginner Settings on Switch Position “1”.
POS-0: ELEV D/R = 50% EXP +30%
POS-0: AILE D/R = 50% EXP +30%
POS-0: RUDD D/R = 100% EXP LIN
POS-1 :ELEV D/R = 30% EXP -10%
POS-1: AILE D/R = 30% EXP -10%
POS-0: RUDD D/R = 100% EXP LIN
3D Settings
ELEV D/R = 100% to 125% > 100% is commonly used
EXP = LIN or -10% to -70% > LIN is commonly used
AILE D/R = 100% to 125% > 100% is commonly used
EXP = LIN or -10% to -70% > LIN is commonly used
RUDD D/R = 100% > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use 100% to 150%
EXP = LIN > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use -10% to -70%
“My text is Copyright 2009 – 2018 Tom Zadar”