Nine Eagles Solo Pro 228P Helicopter – Standard & Beginner Transmitter Settings

 

RC Pro Setup Guide by: Tom Zadar

 

Setup for the Nine Eagles Solo Pro 228P – Nine Eagles J6Pro

 

Type – Helicopter

SWASH – 90*

STMOD – MODE2 if you want the throttle on the left stick

REVERS –  ELEV = NOR, ALIE = REV, THRO = NOR, RUDD = NOR, the rest are Normal.

 

Travel Adjustment: All 100%

For quicker control response increase the ALIE and ELEV Travel Adjustment. *If you set the values too high the servos might bind.
Beginners should use the default values of 100%

Adjust RUDD Travel Adjustment to control the tail response and the speed of pirouettes.

 

Gyro Gain:

Hi Rate: 75%

Low Rate: 25%

 

Throttle Curve

0% 30% 60% 85% 100%

 

DR&EXP

Set D/R and EXPO to your personal preference.

Standard Settings

ELEV D/R = 70%  EXP +30%

AILE D/R = 70%  EXP +30%

RUDD D/R = 100%  EXP LIN

 

Beginner Settings

ELEV D/R = 50%  EXP +30%

AILE D/R = 50%  EXP +30%

RUDD D/R = 100%  EXP LIN

 

Ultra Beginner Settings

These settings are for hovering and slow flight only. These settings have very low servo travel which will make the controls less responsive to stick input if you need to tame down the controls even more.
Don’t try to flip or 3D with these settings.

ELEV D/R = 30%  EXP -10%

AILE D/R = 30%  EXP -10%

RUDD D/R = 100%  EXP +20%

 

 

 

Here is a list I made of common Dual Rate and Expo settings for Standard/Beginner/3D settings for Quads and Helicopters.

If you don’t like to use Expo you can set it to LIN.

LIN = Linear

Some radios use the term Line instead of LIN.

Spektrum – LIN

Walkera Devo – Line

Walkera 2801 Pro – LIN

 

Standard Settings

ELEV D/R = 70% to 100% > 70%, 80%, 85% are commonly used

EXP = +10% to +40% > +30% is commonly used

AILE D/R = 70% to 100% > 70%, 80%, 85% are commonly used

EXP = +10% to +40% > +30% is commonly used

RUDD D/R = 100% > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use 100% to 150%

EXP = LIN > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use -10% to -70%

 

Beginner Settings

ELEV D/R = +40% to +60% > 50% is commonly used

EXP = +30 to +40% > +30% is commonly used

AILE D/R = +40% to +60% > 50% is commonly used

EXP = +30 to +40% > +30% is commonly used

RUDD D/R = 75% to 100% > 100% is commonly used

EXP = LIN or +1% to +20% > LIN is commonly used

 

Ultra Beginner Settings

These settings are for hovering and slow flight only.

ELEV D/R = +30%

EXP = -10%

AILE D/R = +30%

EXP = -10%

RUDD D/R = 75% to 100% > 100% is commonly used

EXP = LIN or +1% to +25% > LIN is commonly used

A good combination would be to use the Beginner Settings on Switch Position “0”
and use the Ultra Beginner Settings on Switch Position “1”.

POS-0: ELEV D/R = 50% EXP +30%

POS-0: AILE D/R = 50% EXP +30%

POS-0: RUDD D/R = 100% EXP LIN

POS-1 :ELEV D/R = 30%  EXP -10%

POS-1: AILE D/R = 30%  EXP -10%

POS-0: RUDD D/R = 100% EXP LIN

 

3D Settings

ELEV D/R = 100% to 125% > 100% is commonly used

EXP = LIN or -10% to -70% > LIN is commonly used

AILE D/R = 100% to 125% > 100% is commonly used

EXP = LIN or -10% to -70% > LIN is commonly used

RUDD D/R = 100% > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use 100% to 150%

EXP = LIN > For faster tail response and pirouettes (Heli) or faster rudder response and pirouettes (Quad) use -10% to -70%

 

 

 

 

 

“My text is Copyright 2009 – 2017 Tom Zadar”