Blade nano QX – Standard & Beginner Settings

Picture courtesy of Horizon Hobby.

 

 

 

Setup for the Blade nano QX – Spektrum DX6I, DX7/DX7s, DX8/DX18 Transmitter.

 

* ACRO Mode

* HELI Mode

 

Quadcopter LED Color:

Solid Blue = Stability Mode

Solid Red = Agility Mode

 

RTF Transmitter LED Color:

Red Blink = Low Rate

Red Solid = Hi Rate

 

 

DX6i

Model Type – Acro

REVERSE – All normal (N)

TRAVEL ADJ – All defaults
For quicker response increase ALIE and ELEV 125% to 150%. For quicker rudder response increase RUDD 125% to 150%.

Stability to Agility Switch -

Cycle Flaps Pos
0-1-0

Stability to
Agility TX Setup -

In FLAPS Menu:
Set NORM FLAP
to Down 20

 

* You may need to reverse the Flap Channel on the DX6i. I hear on the forums that the manual is wrong for the setting.

** Toggle the flap switch back and forth to change flight modes.

 

Dual Rate -
Switch

ELEV-AIL D/R

Aux1
Reverse -

N/A

DR&EXP –  Adjust to your personal preference

Standard Settings

ELEV D/R = 70% EXP INH

AILE D/R = 70% EXP INH

RUDD D/R = 100% EXP INH

 

Beginner Settings

ELEV D/R = 50% EXP +20%

AILE D/R = 50% EXP +20%

RUDD D/R = 100% EXP INH

 

For more D/R and EXPO settings and information see my post here:

Dual Rate and Expo Settings

http://www.rcproreviews.com/dual-rate-and-expo-settings

 

 

DX7

Model Type – Acro

REVERSE – All normal (N)

TRAVEL ADJ – All defaults
For quicker response increase ALIE and ELEV 125% to 150%. For quicker rudder response increase RUDD 125% to 150%.

Stability to Agility Switch -

Cycle Flaps Pos
0-2-0

Stability to
Agility TX Setup -

N/A

Dual Rate -
Switch

ELEV-AIL D/R

Aux1
Reverse -

N/A

DR&EXP –  Adjust to your personal preference

Standard Settings

ELEV D/R = 70% EXP INH

AILE D/R = 70% EXP INH

RUDD D/R = 100% EXP INH

 

Beginner Settings

ELEV D/R = 50% EXP +20%

AILE D/R = 50% EXP +20%

RUDD D/R = 100% EXP INH

 

For more D/R and EXPO settings and information see my post here:

Dual Rate and Expo Settings

http://www.rcproreviews.com/dual-rate-and-expo-settings

 

DX7S/8

Model Type – Acro

REVERSE – All normal (N) except Aux 1 needs to be set to Reverse

TRAVEL ADJ – All defaults
For quicker response increase ALIE and ELEV 125% to 150%. For quicker rudder response increase RUDD 125% to 150%.

Stability to Agility Switch -

Trainer/Bind

Stability to
Agility TX Setup -

In Switch Select
Menu: Set Flap to
Inh, Set Trainer to
Aux1

Dual Rate -
Switch

ELEV-AIL D/R

Aux1
Reverse -

Rev

DR&EXP –  Adjust to your personal preference

Standard Settings

ELEV D/R = 70% EXP INH

AILE D/R = 70% EXP INH

RUDD D/R = 100% EXP INH

 

Beginner Settings

ELEV D/R = 50% EXP +20%

AILE D/R = 50% EXP +20%

RUDD D/R = 100% EXP INH

 

For more D/R and EXPO settings and information see my post here:

Dual Rate and Expo Settings

http://www.rcproreviews.com/dual-rate-and-expo-settings

 

 

DX18

Model Type – Acro

REVERSE – All normal (N) except Aux 1 needs to be set to Reverse

TRAVEL ADJ – All defaults
For quicker response increase ALIE and ELEV 125% to 150%. For quicker rudder response increase RUDD 125% to 150%.

Stability to Agility Switch -

Trainer/Bind

Stability to
Agility TX Setup -

In Channel Assign
Menu Go to Next:
Set 6 AUX1: to I

Dual Rate -
Switch

ELEV-AIL D/R

Aux1
Reverse -

Rev

DR&EXP –  Adjust to your personal preference

Standard Settings

ELEV D/R = 70% EXP INH

AILE D/R = 70% EXP INH

RUDD D/R = 100% EXP INH

 

Beginner Settings

ELEV D/R = 50% EXP +20%

AILE D/R = 50% EXP +20%

RUDD D/R = 100% EXP INH

 

For more D/R and EXPO settings and information see my post here:

Dual Rate and Expo Settings

http://www.rcproreviews.com/dual-rate-and-expo-settings

 

 

DX6I

Model Type – HELI

Reverse: All Normal

Swash Type: 1 SERVO 90°

TRAVEL ADJ – All defaults (100%)
For quicker response increase ALIE and ELEV 125% to 150%. For quicker rudder response increase RUDD 125% to 150%.

Throttle Curve – All defaults for Normal and Stunt mode: 0-25-50-75-100 > Hold: All 0%

Pitch Curve – Used to toggle between Stability and Agility modes

Normal Mode

L 0.0%
2 0.0%
3 0.0%
4 0.0%
H 0.0%

Stunt Mode

L 80.0%
2 80.0%
3 80.0%
4 80.0%
H 80.0%

Hold – All 0%

 

* Keep the F Mode switch in the “0″ position when flying.
To toggle between Stability and Agility modes flip the F Mode switch to the “1″ position and back to “0″ position.

 

 

THRO HOLD

Default is INH. Enable throttle hold and use these settings.

HOLD POS. 0.0%
SW: RUDD D/R

 

DR&EXP –  Adjust to your personal preference

Standard Settings

ELEV D/R = 70% EXP INH

AILE D/R = 70% EXP INH

RUDD D/R = 100% EXP INH

 

Beginner Settings

ELEV D/R = 50% EXP +20%

AILE D/R = 50% EXP +20%

RUDD D/R = 100% EXP INH

 

For more D/R and EXPO settings and information see my post here:

Dual Rate and Expo Settings

http://www.rcproreviews.com/dual-rate-and-expo-settings

 

 

 

 

“My text, pictures and videos are Copyright 2014 Tom Zadar”

Please do not post any of my content or pictures on a web site, forum, blog, etc. You can post a link to this page if you want to.